Controllers for Reverse Osmosis (household)

 

In this section you will learn about the various control systems for the control of depuration reverse osmosis and for home use. Besides the management of a pump and two solenoid valves (one input and the other used for the washing of the osmotic membrane), most of them in a precise measure the conductivity of the water produced. This allows you to continuously monitor the quality of itself. Some of these have the possibility of visualize messages, through a display, and handle various alarms (for example conductivity alarm, pre-alarm and alarm for the replacement of the filter, alarm of low and high pressure, etc. …)

RO FILTER

 

  1. Flushing with second  solenoid valve powered at 230Vac (not programmable)
  2. Pump (230Vac, Pmax = 1.2 kW)
  3. Managing the minimum pressure
  4.  Starting with tap or pressure switch
  5. LCD display with 2×16
  6. Buttons for programming
  7. Power supply 230Vac
  8. Management of the input solenoid valve (230Vac)
  9. Detection of water leaks
  10. Early warning and alarm replacement filters
  11. Thermal motor

Register and download the technical manual  RO Filter:  ITA/ENG

Icon

RO Filter.pdf

1 file(s) 338.15 KB
.

RO DIRECT 230

  1. Flushing with second solenoid valve powered at 230Vac (programmable)
  2. Language selection (English or Italian)
  3. Measurement of the conductivity of the water produced
  4. Pump (230Vac, Pmax = 1.2 kW)
  5. Managing the minimum pressure
  6. Starting with tap or pressure switch
  7. LCD display with 2×16
  8. Buttons for programming
  9. Power supply 230Vac
  10. Management of the input solenoid valve (230Vac)
  11. Detection of water leaks
  12. Early warning and alarm reset with replacement filters
  13. Ability to turn off the LCD backlight.
  14. The ability to exclude the alarm filter replacement
  15. Hours counter pump
  16. Manual Stop
  17. Dimensions: 125x110x60mm

Register and download the technical manual RO Direct 230 ENG

Icon

ro_direct_eng

1 file(s) 1.56 MB
.

OSMO CONTROL LCD/LED

  1. Flushing with second solenoid valve powered at 230Vac (programmable)
  2. Measurement of the conductivity of the water produced
  3. Pump (230Vac, Pmax = 1.2 kW)
  4. Managing the minimum pressure
  5. Automatic osmotic membrane cleaning
  6. Starting with tap or pressure switch
  7. LCD display with 2×16 or Led
  8. Buttons for programming
  9. Power supply 230Vac
  10. Management of the input solenoid valve (230Vac)
  11. Detection of water leaks
  12. Early warning and alarm reset with replacement filters
  13. The ability to exclude the alarm filter replacement
  14. Dimensions: 100x100x50mm

Register and download the technical manual  Osmo Control LCD/LED ITA

Icon

Osmo Control lcd

1 file(s) 1.00 MB
.

 

LEAKAGE-PS-STOP

  1. Power Supply 230VaC
  2. Pump ( 230vac, Pmax=1kW)
  3. Management of the input solenoid valve (230Vac)
  4. Managing the minimum pressure
  5. The ability to exclude the alarm filter replacement
  6. Detection of water leaks

Register and download the technical manual FN-PS-STOP  ITA

Icon

leakage_ps_stop

1 file(s) 48.16 KB